It’s got six tubes. 2 x 6922 plus 4 x 7044 or 5687. It’s got a big honkin’ volume control.
It can drive an amplifier directly if you want, if you don’t “do” digital. Hey and if you happen to have three turntables set up, we give you 2 x MC and 1 x MM selectable inputs! It’s got variable and fixed volume outputs. And All-tube really low Z tube buffered outputs. Like inherently 20 Ohms plus the little 47 Ohm “OK drive those high capacitance audiophile cables why doncha” resistor, so it’s real output impedance is only 67 Ohms. No wanky cathode follower (oh bor-ing) output here like the other guys. We got your real low impedance all-tube outputs right here! It will drive anything and everything. Long cables, no problem.
It’s got selectable gain 50, 55, 60, 65dB on a switch that even auto-mutes as you change it so no nasty bangs.
Gain switch markings are referred to from the input of the 1st active electronics at 1 kHz to the fixed output @ 10k load, regardless of whether source is MM or XFMR stepped-up MC. It is not really practical to include MC step-up gain on the front panel markings due to the variable SOURCE impedances of the MC cartridges and the variable LOADING that the input XFMR will have on any given cartridge. All of this total MC gain variability should be confined to about 3 to 12 dB of range though. XFMR step-up gain plateaus as the load Z on a given MC cartridge is optimized…producing no VOLTAGE gain but in fact a bit more POWER gain… All this means you should set a load Z which sounds best with your particular MC cartridge and adjust gain to suit your system’s operating level. Whatever you like. You will not blow anything up. (Bottom line: there is plenty of gain… enough to do justice to your fave lo-output MC cartridges).
It’s got a mute switch. It’s got a “just turn it down while I cue up so I don’t throw my woofer cones across the room but I still want the same volume I was listening at before I flipped the side” DIM switch.
And what goes with DIM better than SUM which would be the MONO button… It has a killer hyper-regulated outboard power supply that plugs in on the huge-est connector you ever saw. And you can just hit the “standby” button to keep everybody off while you take a small holiday to Tahiti. A backlit “MANLEY STEELHEAD” illuminated badge reflects back to vinyl-days-of-yore while the millions of BLUE LEDs remind you that this is modern tube engineering design, baby! The VARIABLE Outputs are controlled by the precision film dual NOBLE® volume control. They are SMOOTH action these days as the fashion went against the detented ones. This is a tweak-o-holic tube-lover’s dream….
Let’s talk about the LINE input some more:
There is a stereo LINE input included as standard. This means you can drive your amplifiers directly from the Steelhead’s Variable Outputs and select whether you are listening to the Steelhead phono stage or any analog LINE-level source (the analog outputs from your CD player, DAC (Digital to Analog Converter), Tape, Tuner, Television, a whole ‘nuther preamplifier’s main line output, or better yet, use a Manley SKIPJACK to add up to 4 more LINE inputs into your Steelhead!) This feature turns the hifi world upside down. It is novel.
Other features we should mention:
LINE input comes after RIAA stage, but before the volume control and Variable output white follower buffer. The LINE button on faceplate selects LINE input or the output from the built in RIAA stage.
There are clever anti-RFI grounding options user selectable via dip switches on the back for those in high Radio Frequency Interference zones. If you are picking up a local radio station through your system, try playing with these switches.
All the inputs show up via standard RCA jacks.
There is an additional pair of RCA Outputs for those bi-amping or driving amps and a subwoofer directly from the Variable Outputs. This second set of outputs is wired in parallel to the Variable Outputs. If you need them wired to the Direct Outputs, we can do that too upon request.
The motorized volume control has a smooth action when turned by hand or one can control it via the REMORA REMOTE push buttons.
Badge illumination uses nice looking white LEDs which will never burn out.
Output Muting relays changed to short outputs if power is turned off.
Output Muting relays short out the outputs if power is turned off preventing unwanted bangs or pop noises.
The SLEEP button puts the unit into standby conserving power and tube life.
The audio (audible) circuitry has remained largely unchanged since the first Steelhead shipped in 2001.