- USB input 1 x standard B socket; up to 24 bits and 48kHz sampling frequency (music player software can be made to play higher resolution files)
- Digital Outputs 1 x Coax transformer isolated; 1 x Optical; 16 bits and up to 48kHz sampling frequency
Coax
- Distortion, THD+N 0.001%
- Inter-modulation, SMPTE 0.015%
- Frequency response 20Hz – 20kHz +/-0.02dB
- S-N ratio 96dB
Optical
- Distortion, THD+N 0.001%
- Inter-modulation, SMPTE 0.013%
- Frequency response 20Hz – 20kHz +/-0.02dB
- S-N ratio 96dB
- Analogue outputs 1 x 3.5mm jack; 1 x 1/4″ jack; use either for headphones, or 1/4″ jack for line-out via supplied adapter.
Line-out
- Maximum output 1.55V rms
- Distortion,THD+N 0.01%
- Inter-modulation, SMPTE 0.15%
- Frequency response 20Hz – 20kHz +/-1dB
- S-N ratio 76dB
- Output noise (shorted input to stage) -96dB
- Headphone out into 32 Ohm
- Maximum output 750mV rms
- Distortion, THD+N 0.08%
- Inter-modulation, SMPTE 0.25%
- Frequency response 20Hz – 20kHz +/-1dB
- S-N ratio 72dB
- Software Plug & play: supported by native drivers built-in to virtually all operating systems
- Music player software will need to be loaded on your device, for example: Foobar2000 (FB2K), VLC media player, Google Play (on mobiles)
- Music player software can be made to play higher resolution files
- For use with Android phones, an On The Go (OTG) adapter cable is normally required
- For use with iPhones, a camera adapter is usually required
Specifications subject to alteration without notice in keeping with our continuous improvement policy.